INFLUENCE OF TYPE AND QUANTITY OF FILLER ON CHANGE OF DENSITY OF SULFUR CONCRETE

Abstract

Concrete is a material that has been used for centuries and is often modified using polymers. In the last fifty years, synthetic polymers have been used for the modification of concrete, but also for the production of concrete. In recent decades, sulfur concrete has been an interesting product that can be used mainly in low-rise construction due to its characteristics. In this work, we used the starting mixture for the preparation of sulfur concrete (sand, elemental sulfur with the addition of modified sulfur and fillers) heated to a temperature of 120 ºC to 170 ºC and homogenized. The results of previous research on the production of sulfur concrete showed that the density of the obtained product changes depending on the type as well as the amount of filler added to the basic mixture based on raw materials. Talc, microsilicon, plate alumina, and fly ash were used as fillers. The amounts of fillers were 0%, 1%, 3%, 5%, 7% and 10%.