APPLICATION OF UBC METHODOLOGY FOR UNDERGROUND MINING METHOD SELECTION

  • Stojance Mijalkovski Goce Delčev University Štip - Faculty of Natural and Technical sciences
  • Zoran Despodov Goce Delčev University Štip - Faculty of Natural and Technical sciences
  • Dejan Mirakovski Goce Delčev University Štip - Faculty of Natural and Technical sciences
  • Vančo Adjiski Goce Delčev University Štip - Faculty of Natural and Technical sciences
  • Nikolinka Doneva Goce Delčev University Štip - Faculty of Natural and Technical sciences
Keywords: mining method, rational choice, UBC methodology, mining parameters, geological parameters

Abstract

The total operating costs of each mine largely depend on the method of mining. Therefore, the appropriate choice of the method of mining excavation is very important and great attention is paid to this issue. There are several procedures for the selection of the mining method, among which the most important and most commonly used numerical method is the UBC methodology for the selection of the mining method. According to this methodology, the choice of the method of mining excavation is based on the mining-geological parameters of the ore and adjacent rocks.

In this paper, the UBC methodology for the selection of the mining excavation method for a specific case will be applied. According to this methodology, it was obtained that Cut and Fill method is best ranked for specific conditions and the most appropriate way of mining.

References

BOGDANOVIC, D., NIKOLIC, D. and ILIC, I. (2012) Mining method selection by integrated AHP and PROMETHEE method. Annals of the Brazilian Academy of Sciences, 84(1), pp.219–233.

MIJALKOVSKI, S. et al. (2021а) Methodology for underground mining method selection. Mining science, 28, pp.201-216.

NOURALI, H. et al. (2012) A hierarchical preference voting system for mining method selection problem. Archives of mining sciences, 57(4), pp.925-938.

NAMIN, F.S. et al. (2009) Practical applications from decision-making techniques for selection of suitable mining method in Iran. Mineral Resources Management, 25(3), pp.57-77.

BOSHKOV, S.H. and WRIGHT, F.D. (1973) Basic and Parametric Criteria in the Selection, Design and Development of Underground Mining Systems, SME Mining Engineering Handbook, A.B. Cummins and I.A. Given, (eds.), SME-AIME., New York, Vol. 1, 12.2–12.13.

MORRISON, R.G.K. (1976) A Philosophy of Ground Control, McGill University, Montreal, Canada, pp.125–159.

LAUBSCHER, D.H. (1981) Selection of Mass Underground Mining Methods, In: D. Stewart, ed. Design and Operation of Caving and Sublevel Stoping Mines, New York: SME-AIME, pp.23-38.

HAMRIN, H. (1982) Choosing an Underground Mining Method, Underground Mining Methods Handbook. ed. By W. A. Hustrulid. New York: SME– AIME, Section 1.6, pp.88-112.

HAMRIN, H. (1998) Choosing an Underground Mining Method. In Techniques in Underground Mining, Edited by R.E. Gertsch and R.L. Bullock. Littleton, CO: SME.

HARTMAN, H.L. (1992) Selection Procedure, SME Mining Engineering Handbook. New York: AIME Vol. 2, No. 23.4, pp.2090-2106.

NICHOLAS, D.E. (1981) Method Selection—A Numerical Approach, Design and Operation of Caving and Sublevel Stoping Mines, Chap.4, D. Stewart, (ed.), SME-AIME, New York, pp.39–53.

NICHOLAS, D.E. (1992) Selection method, SME Mining Engineering Handbook, Howard L. Hartman (ed.), 2nd edition, Society for Mining Engineering, Metallurgy and Exploration, Inc., pp.2090–2106.

MILLER, T.L., PAKALNIS, R. and POULIN, R. (1995) UBC Mining Method Selection, Mine planning and equipment selection. (MPES), SINGHAL R.K. et at. (Eds), Balkema, Rotterdam, pp.163-168.

GHAZDALI, O., MOUSTADRAF, J., TAGMA, T., ALABJAH, B. and AMRAOUI, F. (2021) Study and evaluation of the stability of underground mining method used in shallow-dip vein deposits hosted in poor quality rock, Mining of Mineral Deposits, 15(3), pp.31-38.

NAMIN, F.S., SHAHRIAR, K. and NASAB, S.K. (2003) Mining Method Selection in Third Anomaly of Gol-E-Gohar Iron Ore Deposit. In: International Mining Congress and Exhibition of Turkey-IMCET 2003, pp.29-34.

ALI, M.A.M. and KIM, J.G. (2021) Selection mining methods via multiple criteria decision analysis using TOPSIS and modification of the UBC method. Journal of Sustainable Mining, 20(2), pp.49-55.

BALT, K. and GOOSEN R.L. (2020) MSAHP: An approach to mining method selection. Journal of the Southern African Institute of Mining and Metallurgy, 120(8), pp.451-460.

MIJALKOVSKI, S., et al. (2021b) Mining method selection for underground mining with the application of VIKOR method. Podzemni radovi, 39(2), pp. 11-22.

Published
2022-06-24
How to Cite
Mijalkovski, S., Despodov, Z., Mirakovski, D., Adjiski, V., & Doneva, N. (2022). APPLICATION OF UBC METHODOLOGY FOR UNDERGROUND MINING METHOD SELECTION. Podzemni Radovi, (40), 15-26. https://doi.org/10.5937/podrad2240015M
Section
Articles